Product Data Sheet PDF Brochure Material Safety Data Installation Guideline Repair Guideline
ECOLINE-T
Exceptional Bonding, Strength, Spanning, and Build Characteristics
TYPICAL UNCURED PROPERTIES
Specific Gravity: 1.13
Viscosity: <50M centipoise
PH: 10.7
Flammability: 270 F
Color: Brown to Black
Non-Toxic: No solvents
Shelf Life: 6 months
TYPICAL CURED PROPERTIES
Initial Cure: 10 minutes
Final Cure: 24-48 hours
Tensile Strength: 319.08 PSI
Elongation: 300%  
Resilience: 80% (recovery)
Moisture Vapor Transmission: .01 gm/sq.ft./hr
Impermeability to water: Up to 36 PSI  
Bonding: pull off force 341 PSI
Resistance to Acids:    
Hydrochloric: 13%
Acetic: 30%
Sulfuric: 13%
Temperature Effect:    
  Stable: 248 F
  Flexible: 13 F
Ecoline-T Specifications

1. PRODUCT NAME:

ECOLINE-T

2. MANUFACTURER

EPRO SERVICES, Inc..
P.O. Box 347
Derby, KS 67037
PHONE: 800-882-1896
FAX: 316-262-2529

3. PRODUCT DESCRIPTION

Basic Use: ECOLINE-T is designed to be a waterproof repair material for a variety of surfaces including concrete (uncured), block, wood, and metal and for a variety of applications including decks, walls (both negative and positive side) and water retainment structures. ECOLINE-T is used in conjunction with mesh or mat material for repairing cracks, joints and spalled areas. It may be used as a waterproofing adhesive for protection/insulation board or file and as a base coat for other water-based surface wearing products.

Composition: ECOLINE-T is a high-viscosity mastic-like material comprised of waterbased bituminous/asphalt emulsion modified with liquid synthetic polymerized rubber and fillers, which exhibits exceptional bonding, strength, spanning, and build characteristics when used in conjunction with reinforcing materials such as fiberglass mesh in multiple layers.


Benefits:

• Superior waterproofing repair material
• Non hazardous, non-toxic, and non-flammable (VOC compliant)
• Excellent spanning and build
• Good tensile strength
• Exceptional bonding
• Not affected by ponded water

Limitations:

• Should be applied to clean and dry surfaces

•Adjacent areas and surfaces should be protected from contact with the product

• Should be applied above 40OF

• A test area should always be done to verify compatibility of substrate with product

• Solvent-based products should not be applied over this product

4. TECHNICAL DATA

Properties: See chart.

Coverages: See chart.

• Specification Writer: Contact EPRO Services, L.C. before writing specifications on this project. Test information available upon request.

5. INSTALLATION

PREPARATION: Must include but not limited to:

• All surfaces should be dry and free of loose materials, release oils and other contaminants. These should be removed prior to application by power washing or other suitable methods.

• A test should always be done prior to application using the same cleaning and application procedures to be used on the project.

APPLICATION

• Should be applied in accordance with specific application specifications.

• ECOLINE-T may be applied by brush or other suitable tools. Application of 20 mil coats will allow ECOLINE-T to cure faster. Cracks and joints should be filled and spanned with mesh in multiple layers prior to final coat application. Deep cracks should be filled up to 1/4" from substrate surface with backer rod or other suitable material and adhered in place by ECOLINE-T prior to spanning with ECOLINE-T and mesh.

CLEANING: Clean all tools with kerosene and/or oil-based cleaners.

6. AVAILABILITY AND COST: Contact the local distributor and/or Authorized Applicator for availability and cost.

7. WARRANTY

Limited Warranty: EPRO warrants this product to be free from defects. EPRO makes no other warranties with respect to this product, express or implied, including without limitation the implied warranties of MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. EPRO's liability shall be limited in all events to supplying sufficient product to retreat the specific areas to which defective product has been applied. EPRO shall have no other liability, including liability for incidental or resultant damages, whether due to breach of warranty or negligence. This warranty may not be modified or extended by representatives of EPRO or its distributors.

MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. EPRO's liability shall be limited in all events to supplying sufficient product to retreat the specific areas to which defective product has been applied. EPRO shall have no other liability, including liability for incidental or resultant damages, whether due to breach of warranty or negligence. This warranty may not be modified or extended by representatives of EPRO or its distributors.

8. MAINTENANCE: No maintenance required.

9. TECHNICAL SERVICES AND INFORMATION: Complete technical services and information are available from EPRO Services, Inc
.