Product Data Sheet PDF Brochure Material Safety Data Installation Guideline Repair Guideline
EPRO Polyester-160
Chemical Exposure (at room temperature) % Retained Strength
Dimethyl Formamide 1,000 hrs. 100%
Ethylene Glycol 1,000 hrs. 100%
1% Sodium Hydroxide 6 hrs. 100%
60% Sulfuric Acid 150 hrs. 54%
Perchlorethylene 1,000 hrs. 100%
Acetone 1,000 hrs. 100%
Distilled Water 1,000 hrs. 100%
Physical Property Data
Weight/Square (lbs.) ASTM D 3776 1.1 
Oz../Sq./Yd. (oz.) ASTM D 3776 1.6
Bulk (mils) 22
Dry Tensile - MD (lbs.) ASTM D 1777 25
Dry Tensile - CD (lbs.) ASTM D 1777 18
Elongation - MD (per cent) ASTM D 1682 45
Elongation - CD (per cent) ASTM D 1682 100
Mullen Burst ASTM D 3786 35
   
EPRO Polyester-160 Specifications

1. PRODUCT NAME

EPRO Polyester-160

2. MANUFACTURER

EPRO SERVICES
P.O. Box 347
Derby, KS 67037
PHONE 800-882-1896
FAX: 316-794-3451

3. PRODUCT DESCRIPTION

Basic Use: EPRO Polyester is designed to act as reinforcement when used in conjunction with Epro spray and fluid applied membranes.

Composition: EPRO Polyester spun laced fabric is a textile material composed of staple fibers hydraulically entangled, which is composed of 100% polyester.

Benefits:
• Excellent comformability and elongation.
• Light weight.
• High tensile strength.
• Exceptional tear resistance.
• Good chemical resistance.
• Non-reaveling.
• Open aperture allows saturation.

Limitations:
• Not to be used when elongation and movement is not desired.

Properties: See chart.

Coverages: See chart.

• Specification Writer:
Contact EPRO Services before writing specifications on this project. Test information available upon request.

5. INSTALLATION

Preparation: Must include but not limited to: • All surfaces should be dry and free of loose materials, release oils and other contaminants. These should be removed prior to application by power washing or other suitable methods.
• Repairs: Any cracks, spall or metal protrusion areas should be repaired by trowel application of ECOLINE-T insuring penetration of materials in damaged or cracked area. Large cracks may also require a layer of fiberglass mesh or polyester mat being spanned over crack and ECOLINE-T applied over this to provide additional membrane strength.
• A test should always be done prior to application using tho same cleaning preparation and application procedures to be used on the project.

Application:
• Should be applied in accordance with specific application specifications. • ECODAMP is to be spray applied with catalyst water by appropriate equipment fitted with specific nozzles (the ECO Spray System) which forms a monolithic water protection coating. Spray application produces an approximate 10 mil build on each pass of spray gun.

Cleaning: Not applicable.

6. AVAILABILITY AND COST:

Contact the local distributor and/or Authorized Applicator for availability and cost.
7. WARRANTY

Limited Warranty: EPRO warrants this product to be free from defects. EPRO makes no other warranties with respect to this product, express or implied, including without limitation the implied warranties of MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. EPRO's liability shall be limited in all events to supplying sufficient product to retreat the specific areas to which defective product has been applied. EPRO shall have no other liability, including liability for incidental or resultant damages, whether due to breach of warranty or negligence. This warranty may not be modified or extended by representatives of EPRO or its distributors.

8. MAINTENANCE:

No maintenance required.

9. TECHNICAL SERVICES AND
INFORMATION:

Complete technical services and informaffon are available from EPRO Services.